EEEKit 20A Solar Charge Controller Solar Panel Charger Controller 12V24V MultiFunction Adjustable LCD Display with Dual USB Port Timer Setting PWM Auto Parameter

Product Description Package Includes: 1 x EEEKit 20A Solar Charge Controller Warranty and Service 24 Months;any questions you have, please don't hesitate to contact us; We will get you back within 24 hours Product Specifications: Suitable for farm solar power system, solar street light, solar patio light, solar billboards, outdoor camping solar system, ship solar system Batt voltage: DC 12V/24V Auto Charge /Discharge current: 20A Over discharge Protection: 10.7V/21.4V Charge recover voltage: 12.6V/25.2V Overcharge Floating charge: 13.7V/27.4V Over discharge Protection: 10.7V/21.4V Equalization: B01: sealed 14.4V / B02: Gel 14.2V / B03: flood 14.6V Easy to operate and installation : Wiring STEPS: Screw the adjustment screw counter-clockwise until the plates move down; Insert the wire into the new opening between the plate and the "top" of the Terminal hole, not under it; Screw the adjuster clockwise and the plate will move upwards thereby squishing the wire in the Terminal hole Installation STEPS Connect the system in the order of 1.Battery > 2. Load > 3.PV Array in accordance with Figure, and disconnect the system in the reverse order 3. 2 .1. Note: <1>Please keep it in cool and well ventilated place to maintain good heat dissipation <2>the regulator is only suitable for lead acid batteries:OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries <3>Make sure your battery has enough voltage for the controller to recognize the battery before first installation <4>The working temperature of this controller is -35°C to 60°C, during hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation